All times are UTC-06:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Wed Nov 05, 2008 5:02 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
Ubuntu 8.10 was released last week, so here come the network install and boot kernels for Pegasos and EFIKA. Before using any of these, please check the 'known problems' section.

Pegasos netinst: http://genesi.hu/ubuntu/intrepid_inst_peg
Pegasos boot: http://genesi.hu/ubuntu/intrepid_boot_peg

EFIKA netinst: http://genesi.hu/ubuntu/intrepid_inst_efika
EFIKA boot: http://genesi.hu/ubuntu/intrepid_boot_efika

Pegasos support is almost perfect, with just one major bug found until now, while EFIKA is a bit problematic...

Known problems:

Both: ext3 partitions created by the installer can't be read by the firmware. This means, that the boot kernel needs to be kept somewhere else (tftp, usb key, partition formated by earlier Linux releases, etc.)

EFIKA:
- xubuntu / XFCE is broken, applications don't start (works fine on Pegasos)
- xubuntu swaps 70+ MB just for starting an empty XFCE
- there is no sound support in kernel

Please let me know, if you need sound support for EFIKA, and then I'll try to fix it. Right now it only makes sense, if one uses 'mpd' (Music Player Daemon), a console music player controlled over the network, or something similar.

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
 Post subject:
PostPosted: Wed Nov 05, 2008 6:24 am 
Offline

Joined: Sun May 08, 2005 8:46 pm
Posts: 559
Location: Paris
thanks Peter, i'll try that tonight
Quote:
Both: ext3 partitions created by the installer can't be read by the firmware. This means, that the boot kernel needs to be kept somewhere else (tftp, usb key, partition formated by earlier Linux releases, etc.)
same problem with the current testing release of Debian. I had to create the partitions with MorphOS before installing anything on it.


Top
   
 Post subject:
PostPosted: Wed Nov 05, 2008 3:52 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
thanks Peter, i'll try that tonight
Quote:
Both: ext3 partitions created by the installer can't be read by the firmware. This means, that the boot kernel needs to be kept somewhere else (tftp, usb key, partition formated by earlier Linux releases, etc.)
same problem with the current testing release of Debian. I had to create the partitions with MorphOS before installing anything on it.
Isn't there a rescue system on the Debian installer, like the one in Fedora and SuSE? You should be able to boot into a live filesystem and create partitions manually from the same media as you install the OS from.

It's still an extra step but if that is what is required, that is what is required.

_________________
Matt Sealey


Top
   
 Post subject:
PostPosted: Thu Nov 06, 2008 5:01 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 51
Location: Czech Republic
Hi Peter!

Thanks! I'm writing this message on my fresh installed Ubuntu 8.10 Intrepid Ibex PowerPC / PegasosPPC II G4 from Firefox 3.0.3 :D

Installation was OK, there are Java 6 (PowerPC), NetBeans 6.1 packages, so as work machine it seems great now!
From user perspective, I think it would be again slow system for me, but nothing is faster than MorphOS :wink:

_________________
Czech PowerPC User Group - http://powerpc.lukysoft.cz
MorphOS Software database - http://morphos.lukysoft.cz/en


Top
   
 Post subject:
PostPosted: Thu Nov 06, 2008 5:19 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 51
Location: Czech Republic
Section "LINUX SUPPORT" on mainpage can be updated -> Ubuntu 8.10.

_________________
Czech PowerPC User Group - http://powerpc.lukysoft.cz
MorphOS Software database - http://morphos.lukysoft.cz/en


Top
   
 Post subject:
PostPosted: Fri Nov 07, 2008 7:33 am 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Section "LINUX SUPPORT" on mainpage can be updated -> Ubuntu 8.10.
You're right but I am going to give Peter some more time on it first :)

_________________
Matt Sealey


Top
   
 Post subject:
PostPosted: Fri Nov 07, 2008 8:14 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
On the Pegasos, I have yet to find another major problem. Only the partition bug is there, which can be worked around, if somebody formats partitions from SuSE (which has a bugfix), or from a command line using:
Code:
mke2fs -I 128 /dev/$partition
parameter.

For the EFIKA I can only suggest to stay with an older release, if used as a desktop, as there is no sound, and even an empty desktop make the machine swap. On SuSE or Debian one can even start 1-2 apps without swapping...

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group