All times are UTC-06:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Problem with sound
PostPosted: Wed May 02, 2012 11:43 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
Hi, I experience some problems with the sound. I use Debian unstable with the efika repo and debian-multimedia.

I have imx-essential installed.

Playing some audio and also video files, I hear sound, others not. Formats that work everytime are flac and wav, for video aac. Ogg gives never sound and mp3 gives no sound with one exception.

I tried with totem, mplayer, and clementine. Any suggestions?

Other perhaps relevant packages I have installed:

i gstreamer0.10-pulseaudio - GStreamer plugin for PulseAudio
i A imx-pulseaudio-config - forces alsa to route through pulseaudio
i A libpulse-mainloop-glib0 - PulseAudio client libraries (glib support)
i A libpulse0 - PulseAudio client libraries
i pulseaudio - PulseAudio sound server
i pulseaudio-esound-compat - PulseAudio ESD compatibility layer
i pulseaudio-utils - Command line tools for the PulseAudio soun
i vlc-plugin-pulse - PulseAudio plugin for VLC
i A libasound2 - shared library for ALSA applications
i libasound2-plugins - ALSA library additional plugins
i A gir1.2-gstreamer-0.10 - Description: GObject introspection data fo
i gstreamer0.10-ffmpeg - FFmpeg plugin for GStreamer
i gstreamer0.10-fluendo-mp3 - Fluendo mp3 decoder GStreamer plugin
i gstreamer0.10-fsl-mm-plugins - Freescale Multimedia Gstreamer Plugin for
i A gstreamer0.10-gconf - GStreamer plugin for getting the sink/sour
i A gstreamer0.10-nice - ICE library (GStreamer plugin)
i gstreamer0.10-plugins-bad - GStreamer plugins from the "bad" set
i A gstreamer0.10-plugins-base - GStreamer plugins from the "base" set
i A gstreamer0.10-plugins-good - GStreamer plugins from the "good" set
i gstreamer0.10-plugins-really-ba - GStreamer plugins from the "bad" set
i gstreamer0.10-plugins-ugly - GStreamer plugins from the "ugly" set
i gstreamer0.10-pulseaudio - GStreamer plugin for PulseAudio
i A gstreamer0.10-x - GStreamer plugins for X11 and Pango
i A libgstreamer-plugins-bad0.10-0 - GStreamer development files for libraries
i A libgstreamer-plugins-base0.10-0 - GStreamer libraries from the "base" set
i A libgstreamer0.10-0 - Core GStreamer libraries and elements


Top
   
 Post subject:
PostPosted: Thu May 03, 2012 10:42 am 
Offline

Joined: Sun Mar 27, 2011 1:18 pm
Posts: 183
Location: Hornell, NY
You can try editing /etc/pulse/daemon.conf and make sure this line is in the file
resample-method = ffmpeg

that should make things behave much better. I plan on helping improve the pulse audio settings package with changes like this (and also a pulse audio profile for the efika) very soon.


Top
   
 Post subject:
PostPosted: Thu May 03, 2012 11:00 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
Thanks, that helped. With some files, there is sometimes a still a clicking noise, but at least they are played. I think, there is still potential for improvement and optimisation. But nevertheless, thank you for your prompt answer.


Top
   
 Post subject:
PostPosted: Fri May 04, 2012 5:25 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
If you don't use HDMI for sound, you could get rid of '''imx-pulseaudio-config''' and pulseaudio all together. I switched from GNOME recently because of pulseaudio: it can't be really used without it, but pulseaudio degrades sound quality even on lot more powerful machines (even my Core i5 laptop).

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
 Post subject:
PostPosted: Sat May 05, 2012 5:15 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
I removed pulseaudio and friends, namely imx-pulseaudio-config, gstreamer0.10-pulseaudio, pulseaudio-esound-compat, pulseaudio-utils, vlc-plugin-pulse, and pavucontrol.

libpulse0 and libpulse-mainloop-glib0 are needed by mplayer and gwenview, respectively.

Then I installed alsa (alsa-base, alsa-utils, alsa-oss) and rebooted. Now I cannot open alsamixer or amixer which means, I cannot change the volume and such.

I get the following error message:
Code:
ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/arm-linux-gnueabihf/alsa-lib/libasound_module_ctl_pulse.so cannot open mixer: No such device or address

The missing file is in libasound2-plugins. After install this, a get that message:
Code:

ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused cannot open mixer: Connection refused
I'll remove mplayer and gwenview and report, but I use these two very often.

Any (other) suggestions?


Top
   
 Post subject:
PostPosted: Sat May 05, 2012 6:22 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
So, I just removed mplayer, gwenview and some other packages needing pulseaudio, like chromium or gnash and purged the packages.

As a picture viewer I use xzgv now. And totem does a good job. For sound files clementine is a very nice piece of software.

There's still another issues concerning video, but for this I'll open a new thread.


Top
   
 Post subject:
PostPosted: Mon May 07, 2012 1:10 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
The pulseaudio libraries don't do any harm, if the pulseaudio server and /etc/asound.conf (coming from imx-pulseaudio-config) are removed. As you can see, these libraries are dependencies for many applications, but they are not used as long as there is no server and configuration.

You can think of pulseaudio as an additional layer in the audio system. It can do many interesting things for PA aware apps, like setting volume for each application, easy output selection, which is useful for HDMI sound. But as an additional layer, it needs CPU, which is a limited resource on the EFIKA MX, and has an effect on sound quality even where CPU power is not a limitation.

I first realized the disadvantages of PA on the EFIKA MX, as CPU made it there even worse, and then made the switch also on my company laptop.

BTW: the EFIKA MX headphones output, once PA is removed, is comparable to high end systems, even if just 48kHz. Here is what I tested a few weekends ago: https://czanik.blogs.balabit.com/2012/0 ... ets-linux/ :)

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
 Post subject:
PostPosted: Mon May 07, 2012 6:28 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
Okay, I reinstalled the programs I needed and they work fine except linphone.

First, if I do a echo test call to 500@ekiga.net I do not hear anything, but the microphone index shows activity. If I plug in some headphones, the microphone is disabled.

Where to start debugging this? I think, I use only alsa and no pulseaudio.


Top
   
 Post subject:
PostPosted: Mon May 07, 2012 6:42 am 
Offline

Joined: Wed May 02, 2012 11:21 am
Posts: 16
I just made a test using a call out service and called myself on a fixed phone which worked. So, either the echo test call is broken or there's another problem which would inhibit p2p calls.

The problem that the micro is disabled with headphones plugged in remains and is really annoying.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group