All times are UTC-06:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mon Nov 15, 2010 12:51 pm 
Offline

Joined: Fri Sep 24, 2010 1:58 pm
Posts: 6
having reasonable sucess with Debian/Squeeze LTSP using the efikamx with the armel architecture, i figured i'd try with the armhf port on debian-ports.org.

the trickier part was that qemu-user-static didn't support armhf, so i had to figure out a way to bootstrap it natively. being who i am and what i do, the easiest way seemed to be using the armel LTSP environment...

so i booted the efikamx to a Debian LTSP armel environment, configured a writeable NFS mount on the server and mounted on the efikamx, installed the ltsp-server packages in the chroot, hacked up the ltsp-build-client plugin to use multistrap instead of debootstrap (since with debian-ports i need to pull from multiple repositories)... other than that, the build went fairly smoothly.

i just used a kernel from
http://www.powerdeveloper.org/platforms/efikamx/kernel, and with an initramfs from the armel environment, and it booted more or less successfully.

trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.

i just now found out those kernels don't really support armhf, so apparently, i'll have to build (or find) and armhf kernel to get any further with this...


Top
   
PostPosted: Mon Nov 15, 2010 1:06 pm 
Offline

Joined: Fri Sep 24, 2010 1:58 pm
Posts: 6
Quote:
trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.

i just now found out those kernels don't really support armhf, so apparently, i'll have to build (or find) and armhf kernel to get any further with this...
apparently that's all wrong. they really don't need an armhf-specific kernel.

might try a different dhcp client and see if i can get that to work...


Top
   
PostPosted: Mon Nov 15, 2010 3:26 pm 
Offline

Joined: Fri Sep 24, 2010 1:58 pm
Posts: 6
Quote:
Quote:
trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.
might try a different dhcp client and see if i can get that to work...
using udhcpc or hacking it to manually configure the network somewhat worked, although now nfsmount segfaults, which is also in klibc; seems there may be issues klibc in general on armhf...


Top
   
PostPosted: Mon Nov 15, 2010 7:08 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
Quote:
trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.

i just now found out those kernels don't really support armhf, so apparently, i'll have to build (or find) and armhf kernel to get any further with this...
apparently that's all wrong. they really don't need an armhf-specific kernel.
Just to clarify on the forum: armhf doesn't need anything more than the kernels on PowerDeveloper, however.. actual packaged kernels (in .deb format for the release) need to be marked with the correct architecture and ship with tools like modtool etc. compiled for the right ABI. The same is true for everything required to build debian-installer: the udebs and modules need to be packaged. The problem is the latest debian-installer depends on kernel >2.6.32 for some reason, so we can't put this support in place right now.

As long as you are not installing headers or pre-prepped kernel source everything will be fine. Boot image and modules are not affected by the userspace ABI.

We're working on 2.6.35+ but we have to fix some bugs in .31 first.

_________________
Matt Sealey


Top
   
PostPosted: Sun Nov 21, 2010 11:28 pm 
Offline

Joined: Fri Sep 24, 2010 1:58 pm
Posts: 6
Quote:
trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.
after tring udhcpc instead, then nfsmount from klibc segfaulted too.

markos re-built klibc without thumb2 support, and that seems to work fine.

after adding a few more device entries in /dev (multistrap leaves a *very* sparse /dev)... it appears to be working!


Top
   
PostPosted: Mon Nov 22, 2010 5:06 am 
Offline

Joined: Wed Oct 13, 2004 7:26 am
Posts: 348
Quote:
Quote:
trying with an initramfs built from the armhf chroot segfaulted with klibc's ipconfig... hrm.
after tring udhcpc instead, then nfsmount from klibc segfaulted too.

markos re-built klibc without thumb2 support, and that seems to work fine.

after adding a few more device entries in /dev (multistrap leaves a *very* sparse /dev)... it appears to be working!
I'm glad it worked!

Check the updated wiki page to see if there's anything missing:

http://wiki.debian.org/ArmHardFloatTodo


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group