All times are UTC-06:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Welcome
PostPosted: Tue May 04, 2010 10:56 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Welcome to RobotShop and the new RobotShop Forum.

RobotShop is a new Distributor of the EfikaMX.

We will be using this Forum to announce projects in support of RobotShop.

Again, welcome!

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Wed May 05, 2010 2:56 pm 
Offline

Joined: Wed May 05, 2010 11:46 am
Posts: 1
Location: Montreal, QC, Canada
Thank you Bill and Raquel for creating this forum for our endeavours with the Efika MX.

I had a chance to use the Efika MX Open Client at the Future Electronics Advanced Engineering University (AEU) event, and I must say that it is a very beautiful (and rather functional) piece of equipment.

The presentation by Johan Dams and Noel Lemouel was terrific. It was very technical and addressed many of my questions and concerns very well. Installing Ubuntu Karmic on the Efika was a breeze (especially since it the OS I personally use) and clearly shows the potential of such a machine.

_________________
Carlos Asmat, Jr. Eng.
RobotShop Inc.
www.robotshop.com


Top
   
 Post subject:
PostPosted: Thu May 06, 2010 4:57 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Thanks Carlos, and we send a thank you to all the team there.

http://www.robotshop.com/Genesi.html

And, yes, Johan and Noel did do a great job - they are the best!

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Fri May 07, 2010 4:11 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
Wow, very interesting shop! I did not know, that robotics went already this far (time to read those Asimov books again :-) ).

The original EFIKA (with 400Mhz PPC) was already a very capable machine when it came to measurement automation, using a couple of sensors and controlling a few devices (see http://bbrv.blogspot.com/2007/05/labview.html ). The EFIKA MX is a lot faster with better connectivity (USB 2, SD reader, video) and easier to use, so definitely a good choice for automation, robotics & Co.

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
 Post subject:
PostPosted: Fri May 14, 2010 12:46 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
There was this RobotShop blog and we missed it...

Genesi EFIKA MX Open Client micro computer

We are thinking we need to have a board only solution again. Perhaps, with more USB ports and both VGA and HDMI. We will see how it goes.

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Fri May 14, 2010 9:01 am 
Offline

Joined: Wed Jul 27, 2005 9:20 am
Posts: 242
Quote:
We are thinking we need to have a board only solution again. Perhaps, with more USB ports and both VGA and HDMI.
YES(!), that's a good idea! :-)


Top
   
 Post subject:
PostPosted: Tue May 18, 2010 3:44 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
A few more USB ports would be a welcome addition, as now the keyboard and mouse take those two on board...

For me, a board only solution makes sense only if it is a standard form factor, for example mini-itx, so a machine could be built with only off the shelf parts. But for most situations, the current case is perfect, as there are no user servicable parts inside, except the boot switches and micro-sd.

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
 Post subject:
PostPosted: Wed May 19, 2010 1:15 am 
Offline

Joined: Mon Jan 08, 2007 3:40 am
Posts: 195
Location: Pinto, Madrid, Spain
As long as it doesn't delay the consumer product even more...

China is going to FLOOD the market with $100 computers that can be seen as the same as the SmartBook.

Very soon, you will be seeing a dozen basement based companies rebadging them and selling like hot cakes, under the marketing claims that eveybody is sold to already.

Added value is key. Or a VERY appealing brand. Or an operator contract. Whatever. The computer itself, as much as we hate to say, isn't that important.


Top
   
 Post subject:
PostPosted: Thu May 20, 2010 8:56 am 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Well, in this context we think RobotShop seeks to add value. We expect to see at least one related offering soon, such as, a "robot" package that includes the Efika MX.

That said, it is clear you are correct about inexpensive computers. This will drive other changes, such as businesses not owning their IT assets, new companies providing cloud services from emerging markets, and a growing worldwide online population compounded by new applications and uses fueled by these newer, more flexible, network oriented computers.

Energy efficiency will also become progressively important. The Efika MX draws 4W in full operation compared to a PC at 65-150W. Every little bit helps. Being "green" is actually more impacted by production and shipping than use. So, we will also see the supply chain moving production closer to consumption. It costs us more to ship and export into many countries that it costs to produce and profit from the hardware.

Adding value is the key while every potential profit opportunity is addressed from the design and bill-of-materials to the arrival and use of the product in the hands of a satisfied consumer.

There is plenty of change ahead!

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Sat May 22, 2010 5:14 pm 
Offline
Site Admin

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1589
Location: Austin, TX
Quote:
A few more USB ports would be a welcome addition, as now the keyboard and mouse take those two on board...

For me, a board only solution makes sense only if it is a standard form factor, for example mini-itx, so a machine could be built with only off the shelf parts. But for most situations, the current case is perfect, as there are no user servicable parts inside, except the boot switches and micro-sd.
A board-only solution for robotics only needs to have easily obtainable screw mount dimensions so it can be bolted to a design :)

Mini-ITX is rather large for the purpose, and defeats the object of using a system like the Efika MX (after all why not use Atom, there are plenty of ITX Atom boards around if you want an ITX robot).

ARM processors have higher integration and smaller profiles, which means smaller robots. The smaller the control board, the more compact the robot :)

In terms of a board-only solution unless there is significant I/O capability which would be covered by the case (on the Efika MX, there is absolutely not..) then it is not worth having two different models. We realized this pretty quickly with the current Efika MX model.

What the Efika MX needs for robotics is an easier way to mount the case onto a robot - perhaps a case which can be mounted to a VESA mount (in a very small design, 100mm by 100mm may be far bigger than the system though!) on the back of a monitor can be used to mount onto a robot too. This would offer a standardized mounting for all solutions.

_________________
Matt Sealey


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group