All times are UTC-06:00




Post new topic  Reply to topic  [ 30 posts ] 
Author Message
PostPosted: Thu Apr 24, 2014 7:36 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 88
Location: Central Europe
Quote:
btw... i have mounted this image, /etc/issue file contains "Ubuntu 10.10", is it okay ?
That is just a small oversight and should not affect any of the functionality.


Top
   
PostPosted: Thu Apr 24, 2014 10:00 am 
Offline

Joined: Sun Mar 27, 2011 1:18 pm
Posts: 183
Location: Hornell, NY
Quote:
is it possible to install this distro on headless smartbox ?

btw... i have mounted this image, /etc/issue file contains "Ubuntu 10.10", is it okay ?
I don't have a headless image set up for this. but there is no reason you couldn't hook up a screen and keyboard and then install this image. it should boot up without a display/keyboard attached. you would just have to make sure that you have ssh installed so you could get into it. if you didn't need any of the dekstop or multimedia stuff you could remove that (tasksel is great for this purpose)

as far as the /etc/issue goes I think i started this image out by upgrading from maverick and then fixing the more major issues that came up by hand. so that might explain why. The actual installer itself (the part where you boot with the SD card and it then turns off) is just the old maverick image with the rootfs tar replaced with my own. been over a year since I worked on this so my memory is a bit fuzzy.


Top
   
PostPosted: Wed Apr 30, 2014 3:04 am 
Offline

Joined: Thu Jul 28, 2005 12:41 am
Posts: 1066
I just would like to say a loud "Thank you!" :)

Finally I'm back from conferences so I had a chance to download the image and install it. It went smoothly, just as installing all the updates. I used my smartbook for an hour and I did not run into any troubles.

_________________
CzP
http://czanik.blogs.balabit.com/


Top
   
PostPosted: Thu May 01, 2014 7:25 pm 
Offline

Joined: Wed Jul 01, 2009 4:35 pm
Posts: 94
Location: Italy
Here my test on Ubuntu 12.04 lts on Efika Mx Smartbook:
http://techuman.wordpress.com/2014/05/0 ... smartbook/
Quote:
That's fine!
Many Thanks!

Next days I'll install it and I'll write a post about it to update friends about this new distro for efikamx.

_________________
http://deliriotecnologico.blogspot.com


Top
   
PostPosted: Fri May 02, 2014 7:27 am 
Offline

Joined: Tue Feb 03, 2009 7:32 am
Posts: 19
Location: Toronto, Canada
Excellent news! Intsalled it early this AM and it seems to work well! Thumbs up to the community for helping to make the Efika MX relevant again for me :)

-Gabor


Top
   
PostPosted: Mon May 05, 2014 3:17 pm 
Offline

Joined: Wed May 02, 2012 1:36 pm
Posts: 13
Location: Germany
Seems to work well except the wireless update might be missing.
> http://steubentech.com/~talon/Efika-MX/ ... 3.5-1spnc/
Without it i had the same issues (freezes) i had a year or two ago.

Other than that it is a armel / soft-float distro without the "odd" ubuntu unity.
Thumbs up for the nice Cairo dock panel work and look.


Top
   
PostPosted: Thu May 08, 2014 1:38 pm 
Offline

Joined: Sun Mar 27, 2011 1:18 pm
Posts: 183
Location: Hornell, NY
Quote:
Seems to work well except the wireless update might be missing.
> http://steubentech.com/~talon/Efika-MX/ ... 3.5-1spnc/
Without it i had the same issues (freezes) i had a year or two ago.

Other than that it is a armel / soft-float distro without the "odd" ubuntu unity.
Thumbs up for the nice Cairo dock panel work and look.
Good point. let me see if I can build a new (well "new" ) compat wireless for it over the weekend. I'm not 100% sure I still have my old patches I used for the precise kernel but I will find out. when I get around to it I will post a link to the deb packages.


Top
   
PostPosted: Thu May 08, 2014 9:58 pm 
Offline

Joined: Sun Mar 27, 2011 1:18 pm
Posts: 183
Location: Hornell, NY
Ok you can now find a working compat-wireless at http://steubentech.com/~talon/Efika-MX/ ... ss/precise

it depends on the linux-firmware package, so install that first.

The source is included and my changes will soon be updated at https://github.com/wschaub/compat-wireless

you can also learn how to build it at http://library.powerdeveloper.net/index ... atWireless


Top
   
PostPosted: Mon May 12, 2014 2:50 pm 
Offline

Joined: Sun May 11, 2014 4:09 pm
Posts: 3
Quote:
Excellent news! Intsalled it early this AM and it seems to work well! Thumbs up to the community for helping to make the Efika MX relevant again for me :)

-Gabor

Have install issue:
- copied *.img file to SD card (sudo dd if=/home/***/precise-armel-installer20140330.img of=/dev/mmcblk0 bs=4096)
- installation process on Efika MX was started but in step (copy desktop files or something similar) laptop suddenly goes off.
- after reboot I see:
BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4.1) built-in shell (ash)
Enter 'help' for a list of buil-in commands.

(initramfs) >

Q: I did something wrong makibg boot SD? Please help


Top
   
PostPosted: Tue May 13, 2014 12:38 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 88
Location: Central Europe
@ Sergiy

Did you try to install using another SD card?


Top
   
PostPosted: Tue May 13, 2014 10:07 am 
Offline

Joined: Sun May 11, 2014 4:09 pm
Posts: 3
Yes, I tried it with two different cards
Last time I successfully installed from it version 10.10


Top
   
PostPosted: Tue May 13, 2014 12:29 pm 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 88
Location: Central Europe
Quote:
Yes, I tried it with two different cards
Last time I successfully installed from it version 10.10
You might want to try writing the image to your SD card via MacOS or Windows. You will find instructions on the following page: https://help.ubuntu.com/community/Insta ... omImgFiles

A few users have had difficulties with "dd" in the past.


Top
   
PostPosted: Fri May 16, 2014 9:19 am 
Offline

Joined: Sun May 11, 2014 4:09 pm
Posts: 3
Quote:
Quote:
Yes, I tried it with two different cards
Last time I successfully installed from it version 10.10
You might want to try writing the image to your SD card via MacOS or Windows. You will find instructions on the following page: https://help.ubuntu.com/community/Insta ... omImgFiles

A few users have had difficulties with "dd" in the past.

Well done,your solution works perfect.
Thank you for help

S


Top
   
PostPosted: Sun Jun 01, 2014 2:32 am 
Offline

Joined: Fri Sep 24, 2004 1:39 am
Posts: 88
Location: Central Europe
Quote:
1. Don't use Ubuntu software center. It's horribly slow. Just use apt-get from command line for both installing and updating things.
I found App Grid (http://www.appgrid.org) to be a nice alternative for people who prefer a more visual and mouse-driven user experience.

Anybody who would like to try it, open a terminal and type the following:
Code:
sudo add-apt-repository ppa:appgrid/stable
sudo apt-get update
sudo apt-get install appgrid
After a successful installation, you will find App Grid in your Application Menu under System Tools / Administration.


Top
   
PostPosted: Tue Aug 12, 2014 8:46 am 
Offline

Joined: Fri Jul 06, 2012 4:03 am
Posts: 19
I suggest to remove the onconf package that burst the cpu after any install/update
Code:
sudo apt-get remove oneconf


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 30 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group