All times are UTC-06:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Boot spalshscreen
PostPosted: Sat Mar 10, 2012 7:38 am 
Offline

Joined: Fri Oct 28, 2011 6:47 am
Posts: 55
Location: Terre
Hi folks,

Is there an howto for plymouth or something like the genesi official bootup screen ?

It will be great to have in DouDouLinux a graphic and animated splash screen. ;-)

Thanks,

_________________
[:-]


Top
   
 Post subject:
PostPosted: Sat Mar 10, 2012 12:13 pm 
Offline
Genesi

Joined: Mon Jan 30, 2006 2:28 am
Posts: 409
Location: Finland
Hi.

Have a look here on how to use Plymouth and create themes:

http://brej.org/blog/?p=158
http://brej.org/blog/?p=174

There is other useful info on that site as well...


Johan.

_________________
Johan Dams, Genesi USA Inc.
Director, Software Engineering

Yep, I have a blog... PurpleAlienPlanet


Top
   
 Post subject:
PostPosted: Sat Mar 10, 2012 4:12 pm 
Offline

Joined: Fri Oct 28, 2011 6:47 am
Posts: 55
Location: Terre
thanks, for the links.

I just made a .deb from the GIT of plymouth (disabling drm)

hope it will give some results.

_________________
[:-]


Top
   
 Post subject:
PostPosted: Sun Mar 11, 2012 5:17 am 
Offline
Genesi

Joined: Tue Feb 07, 2006 4:49 pm
Posts: 145
Location: San Antonio, TX
We didn't do anything magical, just a slight modification of the ubuntu-artwork package, which the changes we made are available in our github, https://github.com/genesi/genesi-artwork

_________________
Steev Klimaszewski, Genesi USA Inc.
Senior Software Engineer


Top
   
 Post subject:
PostPosted: Sun Apr 01, 2012 11:04 am 
Offline

Joined: Fri Oct 28, 2011 6:47 am
Posts: 55
Location: Terre
Is there any update available of a debian package for plymouth ?

Any advice for using smartbook framebuffer with plymouth will be welcome...

_________________
[:-]


Top
   
 Post subject:
PostPosted: Sun Apr 01, 2012 7:14 pm 
Offline

Joined: Sun Mar 27, 2011 1:18 pm
Posts: 183
Location: Hornell, NY
Quote:
Is there any update available of a debian package for plymouth ?

Any advice for using smartbook framebuffer with plymouth will be welcome...
Currently the plymouth package does not build under Debian unstable on armhf, but if you apply this patch to it's source package (what you get by apt-get source plymouth) it should work. I had to make it build in order to build some other piece of software for a project I'm working on.

I haven't actually tested it on Debian though so once you have it built YMMV.

add this as a file in debian/patches and then add the file name to the end of debian/patches/series
Code:
Index: plymouth-0.8.3/configure.ac
===================================================================
--- plymouth-0.8.3.orig/configure.ac 2010-05-06 13:32:14.000000000 -0400
+++ plymouth-0.8.3/configure.ac 2012-04-01 21:02:10.456704233 -0400
@@ -56,16 +56,15 @@
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)

-PKG_CHECK_MODULES(DRM, [libdrm libdrm_intel libdrm_radeon libdrm_nouveau])
+PKG_CHECK_MODULES(DRM, [libdrm libdrm_radeon libdrm_nouveau])

OLD_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $DRM_CFLAGS"
-AC_MSG_CHECKING([if i915_drm.h, radeon_drm.h and nouveau_drm.h are in include path])
+AC_MSG_CHECKING([if radeon_drm.h and nouveau_drm.h are in include path])
AC_COMPILE_IFELSE(AC_LANG_PROGRAM(
[[
#include <stdint.h>
#include <stdlib.h>
- #include "i915_drm.h"
#include "radeon_drm.h"
#include "nouveau_drm.h"
]],[[]]),[found_drm_kernel_headers=yes],[found_drm_kernel_headers=no])
@@ -82,7 +81,6 @@
[[
#include <stdint.h>
#include <stdlib.h>
- #include "i915_drm.h"
#include "radeon_drm.h"
#include "nouveau_drm.h"
]],[[]]),[found_drm_kernel_headers=yes],[found_drm_kernel_headers=no])
@@ -92,7 +90,7 @@
DRM_CFLAGS="$DRM_CFLAGS $MORE_DRM_CFLAGS"
else
AC_MSG_RESULT([no])
- AC_MSG_ERROR([Could not find i915_drm.h, radeon_drm.h and/or nouveau_drm.h])
+ AC_MSG_ERROR([Could not find radeon_drm.h and/or nouveau_drm.h])
fi
fi
CFLAGS="$OLD_CFLAGS"
Index: plymouth-0.8.3/src/plugins/renderers/drm/Makefile.am
===================================================================
--- plymouth-0.8.3.orig/src/plugins/renderers/drm/Makefile.am 2010-01-14 17:05:05.000000000 -0500
+++ plymouth-0.8.3/src/plugins/renderers/drm/Makefile.am 2012-04-01 21:02:39.296701234 -0400
@@ -17,8 +17,6 @@
../../../libply-splash-core/libply-splash-core.la
drm_la_SOURCES = $(srcdir)/plugin.c \
$(srcdir)/ply-renderer-driver.h \
- $(srcdir)/ply-renderer-i915-driver.h \
- $(srcdir)/ply-renderer-i915-driver.c \
$(srcdir)/ply-renderer-radeon-driver.h \
$(srcdir)/ply-renderer-radeon-driver.c \
$(srcdir)/ply-renderer-nouveau-driver.h \
Then patch debian/rules
Code:
--- /home/wschaub/rules 2012-04-01 21:08:42.966703608 -0400
+++ debian/rules 2012-04-01 21:09:17.386703487 -0400
@@ -3,7 +3,7 @@
DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)

%:
- dh ${@}
+ dh ${@} --with autoreconf

override_dh_auto_clean:
dh_auto_clean
then you can do apt-get build-dep plymouth and run dpkg-buildpackage -b -us -uc to create the binary packages.


Top
   
 Post subject:
PostPosted: Mon Apr 02, 2012 1:02 pm 
Offline

Joined: Fri Oct 28, 2011 6:47 am
Posts: 55
Location: Terre
Quote:
Quote:
Is there any update available of a debian package for plymouth ?

Any advice for using smartbook framebuffer with plymouth will be welcome...
Currently the plymouth package does not build under Debian unstable on armhf, but if you apply this patch to it's source package (what you get by apt-get source plymouth) it should work. I had to make it build in order to build some other piece of software for a project I'm working on.

I haven't actually tested it on Debian though so once you have it built YMMV.

add this as a file in debian/patches and then add the file name to the end of debian/patches/series
Code:
Index: plymouth-0.8.3/configure.ac
===================================================================
--- plymouth-0.8.3.orig/configure.ac 2010-05-06 13:32:14.000000000 -0400
+++ plymouth-0.8.3/configure.ac 2012-04-01 21:02:10.456704233 -0400
@@ -56,16 +56,15 @@
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)

-PKG_CHECK_MODULES(DRM, [libdrm libdrm_intel libdrm_radeon libdrm_nouveau])
+PKG_CHECK_MODULES(DRM, [libdrm libdrm_radeon libdrm_nouveau])

OLD_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $DRM_CFLAGS"
-AC_MSG_CHECKING([if i915_drm.h, radeon_drm.h and nouveau_drm.h are in include path])
+AC_MSG_CHECKING([if radeon_drm.h and nouveau_drm.h are in include path])
AC_COMPILE_IFELSE(AC_LANG_PROGRAM(
[[
#include <stdint.h>
#include <stdlib.h>
- #include "i915_drm.h"
#include "radeon_drm.h"
#include "nouveau_drm.h"
]],[[]]),[found_drm_kernel_headers=yes],[found_drm_kernel_headers=no])
@@ -82,7 +81,6 @@
[[
#include <stdint.h>
#include <stdlib.h>
- #include "i915_drm.h"
#include "radeon_drm.h"
#include "nouveau_drm.h"
]],[[]]),[found_drm_kernel_headers=yes],[found_drm_kernel_headers=no])
@@ -92,7 +90,7 @@
DRM_CFLAGS="$DRM_CFLAGS $MORE_DRM_CFLAGS"
else
AC_MSG_RESULT([no])
- AC_MSG_ERROR([Could not find i915_drm.h, radeon_drm.h and/or nouveau_drm.h])
+ AC_MSG_ERROR([Could not find radeon_drm.h and/or nouveau_drm.h])
fi
fi
CFLAGS="$OLD_CFLAGS"
Index: plymouth-0.8.3/src/plugins/renderers/drm/Makefile.am
===================================================================
--- plymouth-0.8.3.orig/src/plugins/renderers/drm/Makefile.am 2010-01-14 17:05:05.000000000 -0500
+++ plymouth-0.8.3/src/plugins/renderers/drm/Makefile.am 2012-04-01 21:02:39.296701234 -0400
@@ -17,8 +17,6 @@
../../../libply-splash-core/libply-splash-core.la
drm_la_SOURCES = $(srcdir)/plugin.c \
$(srcdir)/ply-renderer-driver.h \
- $(srcdir)/ply-renderer-i915-driver.h \
- $(srcdir)/ply-renderer-i915-driver.c \
$(srcdir)/ply-renderer-radeon-driver.h \
$(srcdir)/ply-renderer-radeon-driver.c \
$(srcdir)/ply-renderer-nouveau-driver.h \
Then patch debian/rules
Code:
--- /home/wschaub/rules 2012-04-01 21:08:42.966703608 -0400
+++ debian/rules 2012-04-01 21:09:17.386703487 -0400
@@ -3,7 +3,7 @@
DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)

%:
- dh ${@}
+ dh ${@} --with autoreconf

override_dh_auto_clean:
dh_auto_clean
then you can do apt-get build-dep plymouth and run dpkg-buildpackage -b -us -uc to create the binary packages.
Whaouuuu...

Great fix !
Thank you, for this.

Now doudoulinux can have is splash screen too. ;)

_________________
[:-]


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group