All times are UTC-06:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Aug 10, 2011 12:16 am 
Offline

Joined: Thu Mar 17, 2011 10:28 pm
Posts: 5
Location: Dar es Salaam
The good news: The Efika system runs more stable with the improved system I have been shipped, guess its the one Genesi was using on its fair last month.

The bad news: Still I experience occasional freezes though rare. One main problem still is the log-in screen (dodged by the fair's configuration) where some times the password field does not allow to type into, or other funny variants.

The good news in the bad news: After these freezes I can boot from the installer SD into a terminal and repair the internal sda. Mostly there are a lot of inode problems to be fixed.

The bad news in the bad news: This procedure does not work well. The terminal process can stall entirely or resurrect after a long time (30min!) bringing up timeout messages like:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen

:idea: wasn't the intention behind Ubuntu to run without forcing the user to deal with this under the hood code? :roll:


Top
   
PostPosted: Mon Aug 15, 2011 3:12 am 
Offline

Joined: Thu Mar 17, 2011 10:28 pm
Posts: 5
Location: Dar es Salaam
Hi folks, 99 views so far and no reply?

Well my case turned worse: on boot I was greeted by this terminal which always comes when no bootable system is found. /dev/sda2 went missing.

So I installed a new system. But this system freezes regularly with greetings like 'broken pipe', 'deleted inode referenced' or on suspend: kernel panic, not saving, fatal exception in interrupt.

IMHO another internal 16GB flash disk defect, which causes plenty of read/write errors or corrupted directories.

When trying to check /dev/sd* externally terminal stalls.


Top
   
 Post subject:
PostPosted: Mon Aug 15, 2011 4:43 am 
Offline

Joined: Sun May 01, 2011 6:12 pm
Posts: 42
Location: Denmark
IMO you aren't getting any replies because no one has anything to add; it seems you figured it out yourself already: the disk is broken. That's what I think is the case at least.
I've always experienced those "atax.00: exception Emask [...]"-type messages with a broken disk or a disk that was dying, so I agree with your diagnosis.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group