Using Efika machine description
Only using first contiguous memory region<5>Linux version 2.6.19.2 (nicolas@Caladan) (version gcc 3.4.6 (Debian 3.4.6-5)) #16 PREEMPT Mon Feb 11 08:43:36 CET 2008
Entering add_active_range(0, 0, 32768) 0 entries of 256 used
Efika: PCI bus 0 controlled by /pci@80000000

Top of RAM: 0x8000000, Total RAM: 0x8000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA             0 ->    32768
  Normal      32768 ->    32768
early_node_map[1] active PFN ranges
    0:        0 ->    32768
On node 0 totalpages: 32768
  DMA zone: 256 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 32512 pages, LIFO batch:7
  Normal zone: 0 pages used for memmap
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/mpc52xx_ata6 ro
MPC52xx PIC: MPC52xx PIC Remapped at 0xf0000500
MPC52xx PIC: MPC52xx SDMA Remapped at 0xf0001200
MPC52xx PIC is up and running!
linux_irqhack: irq=0x82, virq=0x82
linux_irqhack: irq=0xc6, virq=0xc6
linux_irqhack: irq=0xc7, virq=0xc7
PID hash table entries: 512 (order: 9, 2048 bytes)
time_init: decrementer frequency = 33.000000 MHz
time_init: processor frequency   = 396.000000 MHz
Console: colour dummy device 80x25
/builtin@F0000000/serial@F0002000 assigned to ttyPSC0
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124456k/131072k available (4548k kernel code, 6460k reserved, 360k data, 165k bss, 176k init)
Calibrating delay loop... 65.53 BogoMIPS (lpj=32768)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#1"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#2"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#3"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#4"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#5"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#6"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "interface@0#7"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "sound@2#1"
device-tree: Duplicate name in /builtin@F0000000/usb@F0001000/hub@0/device@2, renamed to "sound@2#2"
NET: Registered protocol family 16
Efika : Added pic@f0000500 (type 'interrupt-controller' at '/builtin@F0000000/pic@F0000500') to the known devices
Efika : Added bestcomm@f0001200 (type 'dma-controller' at '/builtin@F0000000/bestcomm@F0001200') to the known devices
Efika : Added sram@f0008000 (type 'memory' at '/builtin@F0000000/sram@F0008000') to the known devices
Efika : Added ata@f0003a00 (type 'ata' at '/builtin@F0000000/ata@F0003A00') to the known devices
Efika : Added usb@f0001000 (type 'usb' at '/builtin@F0000000/usb@F0001000') to the known devices
Efika : Added ethernet@f0003000 (type 'network' at '/builtin@F0000000/ethernet@F0003000') to the known devices
Efika : Added sound@f0002200 (type 'sound' at '/builtin@F0000000/sound@F0002200') to the known devices
Efika : Added serial@f0002000 (type 'serial' at '/builtin@F0000000/serial@F0002000') to the known devices
Efika : Added pcidma@f0003800 (type 'dma-controller' at '/builtin@F0000000/pcidma@F0003800') to the known devices
PCI: Probing PCI hardware
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1202846619.314:1): initialized
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
radeonfb_pci_register BEGIN
PCI: Enabling device 0000:00:10.0 (0002 -> 0003)
aper_base: 80000000 MC_FB_LOC to: 87ff8000, MC_AGP_LOC to: ffff9000
radeonfb (0000:00:10.0): Found 131072k of DDR 64 bits wide videoram
radeonfb (0000:00:10.0): mapped 16384k videoram
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: No ATY,RefCLK property !
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz
radeonfb: PLL min 20000 max 40000
1 chips in connector info
 - chip 1 has 2 connectors
  * connector 0 of type 2 (CRT) : 2300
  * connector 1 of type 3 (DVI-I) : 3201
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... found CRT display
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
radeonfb: I2C (port 3) ... not found
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: I2C (port 4) ... not found
radeon_probe_OF_head
radeonfb: I2C (port 2) ... found CRT display
radeon_probe_OF_head
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
radeonfb: I2C (port 3) ... not found
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: I2C (port 4) ... not found
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
hStart = 1328, hEnd = 1520, hTotal = 1728
vStart = 1026, vEnd = 1030, vTotal = 1066
h_total_disp = 0x9f00d7	   hsync_strt_wid = 0x18053a
v_total_disp = 0x3ff0429	   vsync_strt_wid = 0x40401
pixclock = 9045
freq = 11055
freq = 11055, PLL min = 20000, PLL max = 40000
ref_div = 12, ref_clk = 2700, output_freq = 22110
ref_div = 12, ref_clk = 2700, output_freq = 22110
post div = 0x1
fb_div = 0x62
ppll_div_3 = 0x10062
Console: switching to colour frame buffer device 160x64
radeonfb (0000:00:10.0): ATI Radeon Yd 
radeonfb_pci_register END
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: MPC52xx PSC UART driver
mpc52xx-psc-uart serial@f0002000: mpc52xx_uart_probe(op=c7fcca00, match=c048b908)
Found /builtin@F0000000/serial@F0002000 assigned to ttyPSC0
mpc52xx-psc-uart serial@f0002000: mpc52xx-psc uart at f0002000, irq=81, freq=66000000
serial@f0002000: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
MPC52xx/OpenFirmware: 13664 kB of free SRAM
 mpc52xx_ata: RDSK (512) mpc52xx_ata1 (LNX^@)(res 2 spb 1) mpc52xx_ata2 (EXT^C)(res 2 spb 1) mpc52xx_ata3 (SWP^@)(res 2 spb 1) mpc52xx_ata4 (EXT^C)(res 2 spb 1) mpc52xx_ata5 (EXT^C)(res 2 spb 1) mpc52xx_ata6 (EXT^C)(res 2 spb 1)
MPC52xx ATA/PIO: MPC52xx ATA/PIO (Version 0.7 - Compiled date Feb 11 2008 at 07:59:15)
mpc52xx_ata:  configuration:
mpc52xx_ata: 	 * Multi-PIO commands: available (16 sectors per shot)
mpc52xx_ata: 	 * PIO Mode: 4
mpc52xx_ata: 	 * LBA48 supported: Yes
mpc52xx_ata: 	 * CHS: Ko (0/0/0)
mpc52xx_ata: 	 * SDMA Engine: Enable
eth0: Phy @ 0x10, type GENERIC (0x00008201)
ppc-of-ohci usb@f0001000: USB Host Controller
ppc-of-ohci usb@f0001000: new USB bus registered, assigned bus number 1
ppc-of-ohci usb@f0001000: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using ppc-of-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new low speed USB device using ppc-of-ohci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.2: new full speed USB device using ppc-of-ohci and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.3: new low speed USB device using ppc-of-ohci and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input:   USB Multimedia Keyboard  as /class/input/input0
input: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-PPC-OF USB-1.1
input:   USB Multimedia Keyboard  as /class/input/input1
input: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-PPC-OF USB-1.1
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-PPC-OF USB-1.3
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k init
Adding 976888k swap on /dev/mpc52xx_ata3.  Priority:-1 extents:1 across:976888k
EXT3 FS on mpc52xx_ata6, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mpc52xx_ata2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: config: auto-negotiation on, 100HDX, 10HDX.
