All times are UTC-06:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sat Dec 01, 2007 7:03 am 
Offline

Joined: Tue Feb 14, 2006 2:01 pm
Posts: 75
Location: Germany
Grap the latest boot image from http://dev.gentoo.org/~corsair/efika/

1. Install and configure a tftp server on another machine (*not* on the efika, the other machine has to be in the same network). I use atftp. I will use 192.168.0.2 as the server adress in this tutorial. Replace it with the correct value.

2. Place efika.forth and efika_yyyymmdd.img in /tftroot/ (or whereever you configured it to be).

Alternative:
Place the efika.forth and efika_yyyymmdd.img on an USB stick.


3. make sure an DHCP server is running in your network

4. power on your efika and execute the efika.forth script:
Code:
ok s" eth:192.168.0.2 efika.forth" $boot
Efika 5200B Device Tree Supplement 20071114
(c) 2007 Genesi USA, Inc.
http://www.powerdeveloper.org/ for support

Adding Clock Distribution Module
Adding Simple GPIO Module
Adding Wakeup GPIO Module
Adding Slice Timer 1
Adding General Purpose Timer 0
Adding General Purpose Timer 1
Adding General Purpose Timer 2
Adding General Purpose Timer 3
Adding General Purpose Timer 4
Adding General Purpose Timer 5
Adding General Purpose Timer 6
Adding General Purpose Timer 7
Adding Ethernet PHY
Adding SDRAM Controller
Adding XLB Arbiter
ok
5. Load and execute the image:
Code:
ok boot eth:192.168.0.2,efika_yyyymmdd.img
[...]
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 152k init
/ $
6. Follow the Gentoo PPC Handbook. You can skip the first sections and start with "Configuring the network". Network setup should be as easy as dhcpcd eth0.

EDIT: you might want to use these experimental uclibc stages instead of the default glibc based ones:

http://releases.barfoo.org/ppc/stages/uclibc/

(the ones on the mirrors are pretty outdated)


7. When selecting the kernel unmask a kernel >=2.6.24-rc7.

8. You can leave out "Configuring the bootloader" as Efika's firmware can load kernels directly.

9. Have fun!


Last edited by corsair on Wed Jan 16, 2008 6:33 am, edited 2 times in total.

Top
   
 Post subject:
PostPosted: Tue Dec 11, 2007 7:02 pm 
Offline
Genesi

Joined: Fri Sep 24, 2004 1:39 am
Posts: 1422
Markus, are you and humpback cooperating?

Just curious?!?

Thanks.

R&B :)

_________________
http://bbrv.blogspot.com


Top
   
 Post subject:
PostPosted: Wed Dec 12, 2007 12:18 pm 
Offline

Joined: Tue Feb 14, 2006 2:01 pm
Posts: 75
Location: Germany
Quote:
Markus, are you and humpback cooperating?
No, we are not. Maybe we should! :D

Currently this image is trail&error.. I plan to integrate this in catalyst, when the progress stabilizes. Building this images would get as easy as possible. People could add programms on their own and such things. But that's "future stuff"...

I also have to finish the project I got the efika officially for...

EDIT: this are the steps I do to build the image:
Code:
ROOT="/efika-root/" emerge baselayout-lite
ROOT="/efika-root/" USE="make-symlinks static" emerge busybox
ROOT="/efika-root/" emerge uclibc dropbear e2fsprogs dhcpcd

# change hostname in /etc/hostname
echo efika >> /efika-root/etc/hostname
# create ttyPSC0
mknod /efika-root/dev/ttyPSC0 c 204 148
# put serial console in /efika-root/etc/inittab
sed -i -e "s/#ttyS0::respawn:\/sbin\/getty -L ttyS0 115200 vt100/ttyPSC0::respawn:\/sbin\/getty -L ttyPSC0 115200 vt100/" /efika-root/etc/inittab
# automatically login
sed -i -e "s/\/sbin\/getty 38400 tty1/\/bin\/sh/" /efika-root/etc/inittab
sed -i -e "s/\/sbin\/getty 38400 tty2/\/bin\/sh/" /efika-root/etc/inittab
sed -i -e "s/\/sbin\/getty -L ttyPSC0 115200 vt100/\/bin\/sh/" /efika-root/etc/inittab

# create neccessary directories
mkdir /efika-root/var/run


# create the image
mkdir -p efika-root-stripped/
cp -a /efika-root/ efika-root-stripped/
rm -rf usr/include/ usr/lib/pkgconfig/ usr/share/busybox/ var/cache/edb/ var/db/pkg/ var/lib/portage/ etc/portage/
dd if=/dev/zero of=efika-root.img bs=512K count=11
mke2fs -F efika-root.img
mount efika-root.img /mnt/efika-root/ -o loop
cp -a efika-root-stripped/* /mnt/efika-root/

# create the image
mkvmlinuz-33.corsair/mkvmlinuz -o efika_20071131.img -k /root/vmlinux -s /root/System.map -i /root/efika-root.img -d /root/mkvmlinuz-33.corsair/boot -r 2.6.24 -u -v
mkvmlinuz comes originally from debian, but I had to update/patch the tool a bit. You can grab my version here:

http://git.42labs.org/?p=mkvmlinuz-mrothe;a=summary

or directly through git:
Code:
git clone git://git.42labs.org/var/git/mkvmlinuz-mrothe


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-06:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
PowerDeveloper.org: Copyright © 2004-2012, Genesi USA, Inc. The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.
All other names and trademarks used are property of their respective owners. Privacy Policy
Powered by phpBB® Forum Software © phpBB Group